Your Hyundai i30 (N) is missing a data display! We have – the CANchecked MFD28 Gen2 for the Hyundai i30 and i30 N (Model GD 2011-2017, Model PD from 2017).
Of course it also fits the N models.
Access to all data from the engine. The sensors are queried directly via Can Bus and are displayed on our proven MFD28. The display for the Hyundai i30 (N) comes with a vehicle-specific bezel and fits into the interior like an original part. This means that the ventilation through the slots remains intact.
Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum query speed.
Key features:
- integrates perfectly into the vehicle interior
- Up to 64 sensors can be queried
- 10 individually configurable views with our DSS – Display Setup Software
- ready-made views for a quick start with our display
- simply plug and play via our cable set – plug in, done
- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more
- best readability – optionally enclosed anti-reflection film
- Querying the sensors like manufacturer diagnostic tools
performance meters
Measure your acceleration times in our performance widget – 0-100, 100-200, 0-200
Data logging
Log all data onto the internal SD card. Regardless of whether “on-demand” (start with a tap of a finger) or permanently. All data of your last turn is saved.
Preset alarms
Ready-made warnings can be easily activated and also customized. For example, get a big warning if the exhaust gas temperature is over 900 degrees.
4 additional analog inputs
Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust back pressure. An ethanol sensor can be connected to one of the digital inputs.
Read/delete errors
Read out errors from the engine control unit in plain text and also delete them
individual design
It doesn’t matter whether it’s the individual start screen or the selection from a large number of different widgets. Make the display your ad !
Seamless vehicle integration
Access to all data from the engine control unit
By default, we deliver a ready-made TRI file to your display. All sensors that are queried are defined here.
Temperatures:
- Engine water temperature, oil temperature, intake temperature
Pressures:
- Boost pressure, ambient pressure, fuel pressure, high-pressure pump
Lambda/mixture
- Lambda value target/actual, injection time, short-term lambda adjustment, long-term lambda adjustment
Miscellaneous
- Speed, air mass (g/s), vehicle speed, throttle valve angle, total ignition angle, ignition angle per cylinder, terminal 30 voltage, gear
If values are missing, they can easily be added. It always depends on the motor as to whether it supports the values; sometimes not all sensors are available.
For which engines and models is the Hyundai i30 N display
The bezel of the display fits all Hyundai i30 (GD) and a bezel for the i30 facelift (PD) is also ready – the respective version for RHD (right-hand drive) is also available. The data may vary between the different engines.
If you have any questions, please contact us – please always tell us the exact vehicle type and engine.
Reading and deleting errors
With a “Swipe” down you get access to the “DTC” (Diagnostic Trouble Codes = error memory). The display reads the error memory from the engine. Optionally, you can also delete them directly on the display.
Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving.
Buy your new CANchecked Hyundai i30 N display
The display for the Hyundai i30 /i30 N as well as all of our other items can be obtained from one of our dealers.
Installation instructions / download
We have prepared installation instructions for installation:
German: Installation Instructions-Hyundai-i30N.pdf
English: Installation-Instruction-Hyundai-i30N.pdf
If you still have problems, our support is available to you: contact form