In the last few weeks we have been able to finalize the panel for the BMW E30 and thus the first installation took place at a customer. So we are showing our very first BMW E30 display installed here.
Our BMW E30 panel can be installed like the original air vent and only requires a small “trick” during installation. The aperture is swung all the way down. Then use a thin plastic spatula to go left between the ventilation grille and the dashboard. There is a limiting nipple at the back – the display has to be twisted a little further beyond this point. Then it can be pulled out to the front.
If you look at the BMW E30 panel before installation, this becomes even clearer. The display is pushed back at the same angle as the ventilation grille was removed and then swiveled into the normal position.
All functions of the MFD28 – Multi Function Display are retained. The customer can design all views and their widgets himself. In the example we have imitated the well-known “Alpina” display and thus get a great retro display with the look of the original components.
– More pictures –
After successfully installing and wiring the sensors, we were able to put the display into operation.
– View at night (dimming function) –
The dimming function of the display ensures great readability even at night.
After the successful installation and wiring of the sensors, we were able to put the display into operation.
