Your Skoda Octavia is missing a data display! We have – the CANchecked MFD32 Gen2 for the Skoda Octavia MK3 (Model 5E 2012-2020).
Access to all data from the vehicle – i.e. ALL (as well as transmission, speedometer, etc.). The sensors are queried directly via Can Bus and are displayed on our proven MFD28 (BUT as 3.2″) . The Skoda Octavia MK3 display comes with a vehicle-specific panel and fits into the interior like an original part. This keeps the Ventilation through the slots remains intact.
Our display emulates a manufacturer tester so that all detailed values are available. We have optimized the protocol to achieve maximum query speed.
Key features:
- integrates perfectly into the vehicle interior
- Up to 64 sensors can be queried
- 10 individually configurable views with our DSS – Display Setup Software
- ready-made views for a quick start with our display
- simply plug and play via our cable set – plug in, done
- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more
- best readability – optionally enclosed anti-reflection film
- Querying the sensors like manufacturer diagnostic tools
performance meter
Measure your acceleration times in our performance widget – 0-100, 100-200, 0-200
Data logging
Log all data onto the internal SD card. Regardless of whether “on-demand” (start with a tap of a finger) or permanently. All data of your last turn is saved.
Preset alarms
Ready-made warnings can be easily activated and customized. For example, I get a big warning message when the exhaust gas temperature is over 900 degrees.
4 additional analog inputs
Additional temperature and/or pressure sensors can be connected for further monitoring options. e.g. exhaust gas temperature or exhaust back pressure. An ethanol sensor can be connected to one of the digital inputs.
Read/delete errors
Read out errors from the engine control unit in plain text and also delete them
individual design
No matter whether the individual home screen or the selection from a variety of different widgets. Make the display your ad !
Seamless vehicle integration
Access to all data from the engine control unit
By default, we deliver a ready-made TRI file to your display. All sensors that are queried are defined here.
Temperatures:
- Exhaust gas temperature, engine water temperature, oil temperature, intake temperature, outside temperature, gasoline temperature, transmission temperature
pressures:
- Boost pressure, ambient pressure, pre-feed pump fuel pressure target/actual, high-pressure pump fuel pressure target/actual
Lambda/mixture
- Lambda value target/actual, injection time, short-term lambda adjustment, long-term lambda adjustment
Miscellaneous
- Engine speed, air mass (g/s), vehicle speed, throttle valve angle, total ignition angle, ignition angle retardation per cylinder, N75 activation in %, terminal 30 voltage, torque, gear
If values are missing, they can be added easily. It always depends on the motor as to whether it supports the values; sometimes not all sensors are available.
For which engines and models is the display
The display cover fits all Skoda Octavia MK3 left-hand drive vehicles. A version for RHD (right-hand drive) will follow soon.
If you have any questions, please contact us – please always tell us the engine code of your vehicle.
Read out and delete errors
With a “Swipe” down you get access to the “DTC” (Diagnostic Trouble Codes = error memory). The display reads the error memory of the engine, transmission, ABS and, if available, the all-wheel drive system (Haldex). Optionally, you can also delete them directly on the display.
Errors for the engine are displayed in plain text so that you can decide for yourself whether you can continue driving.
Buy your new Skoda Octavia MK3 display
The Skoda Octavia MK3 display as well as all of our other items can be purchased from one of our dealers.
Installation instructions / download
We have prepared instructions for installation: Installation Instructions-Skoda-Octavia-MK3-5E.pdf
If you still have problems, our support is at your disposal: contact form