Here we present our display for the Subaru Impreza 2007-2011 including WRX STI.
Access to all data from the engine control unit. So ALL. The sensors are queried directly via Can Bus and are displayed on our proven MFD32. The Subaru Impreza display comes with a vehicle-specific cover and fits into the interior like an original part. The ventilation remains intact through the slots.
The sensors are queried via OBD2 and directly from the Can Bus. We have optimized the protocol to achieve maximum query speed.
Key features:
- integrates perfectly into the vehicle interior
- Up to 128 sensors can be queried
- 10 individually configurable views with our DSS – Display Setup Software
- ready-made views for a quick start with our display
- simply plug and play via our cable set – plug in, done
- 4 additional analogue inputs for exhaust gas temperature, oil pressure and more
- best readability – optionally enclosed anti-reflection film
- Querying the sensors like manufacturer diagnostic tools
performance meter
Measure your acceleration times in our performance widget – 0-100, 100-200, 0-200
Data logging
Log all data onto the internal SD card. Regardless of whether “on-demand” (start with a tap of a finger) or permanently. All data of your last turn is saved.
Preset alarms
Ready-made warnings can be easily activated and customized. For example, I get a big warning message when the exhaust gas temperature is over 900 degrees.
4 analog additional inputs
Additional temperature and/or pressure sensors can be connected for further monitoring options. eg exhaust gas temperature or exhaust gas back pressure. An ethanol sensor can be connected to one of the digital inputs.
Read/delete errors
Read out errors from the engine control unit in plain text and also delete them
individual design
It doesn’t matter whether it’s the individual start screen or the selection from a large number of different widgets. Make the display yours!
Seamless vehicle integration of the display for Subaru Impreza 2007-2011 incl WRX STI
standard views
Access to all data from the engine control unit
As standard, we supply your display with a ready-made TRI file. All sensors that are queried are defined here.
Temperatures:
- Engine water temperature, intake temperature, outside temperature, gasoline temperature, catalytic converter temperature
Pressures:
- Boost pressure, ambient pressure
Lambda/mixture
- Lambda value target/actual, short-term lambda adjustment, long-term lambda adjustment, MAF, engine load, torque
Driver dynamics:
- Brake percentage, steering angle, vehicle speed, throttle angle/accelerator position, longitudinal and lateral acceleration, yaw acceleration
Miscellaneous
- RPM, fuel level, 4x wheel speed, vehicle speed, total ignition angle, gear, battery voltage, MapSelect, DCCD, low beam, high beam, engine control light, handbrake, brake light switch, ESP
Analog inputs
- additional sensors can be added here: oil temperature, fuel pressure, oil pressure, exhaust gas temperature, etc
If values are missing, they can easily be added.
ATTENTION: not every engine offers all values!
What engines and models is the Subaru Impreza 2007-2011 display for
The bezel of the display fits all Subaru Impreza 2007-2011 incl. WRX STI left-hand drive vehicles. A version for RHD (right hand drive) is also available in .
Buy your new display for your Subaru Impreza 2007-2011 incl WRX STI
The Subaru Impreza 2007-2011 including WRX STI display as well as all other items from us are available through one of our dealers.
Installation instructions
You can find the illustrated installation instructions here:
German: Installation instructions Subaru-WRX-STI-2007-to-2011
English: Installation-instruction-Subaru-WRX-STI-2007-to-2011